Table dimensions are:
29” high
55” wide
40-1/2” deep with folding portion extended—approximately 20” per section when back section is folded down
21” wide x 11” variable height cut out for machine with spring lift
The cabinet has two drawers and a lower shelf on the left front.
The surface of the cut out area may be lowered to a depth so the top of the free arm is flush with the table surface. A plastic insert made to fit around
a specific machine may be ordered to fill the cut out surface. Alternately, the cut out area may be raised so it is flush with the table top allowing use of the free arm of the machine, for example, to put sleeves into a garment.
Any machine that will fit within the 21” x 11” cut out will work on this table.
An instruction sheet from the manufacturer is available.
